When a renovation is in the planning stage, the electrical side rarely gets scheduled first. It should. Adding a room, converting a garage, upgrading a kitchen, or bringing in a high-draw appliance all touch the wiring and the panel before a single fixture goes up. Getting that scoped early means the rest of the project does not stall waiting on a circuit that was never run or a panel that cannot carry the new load.
We handle electrical work across Richardson for homeowners planning updates and for property managers keeping rental units up to standard. We are available around the clock, any day of the week, and the call is where the job gets scoped. Decisions about the work get made while you are on the phone.
Electrical pricing does not start with a flat rate. It starts with a conversation about what the job actually involves. A simple outlet swap is one thing. A new circuit that has to run through finished walls, connect to a panel with limited capacity, and meet current arc-fault requirements is another. Those are different jobs and they carry different prices.
What moves a quote is the condition of what is already there. If the panel turns out to be at capacity, the job grows. If the wiring behind a wall is older than the outlet being replaced, that changes what needs to happen. If a dedicated circuit for a new appliance requires a subpanel because the main cannot take another breaker, the scope shifts.
None of that is a surprise if it gets discussed on the call. We walk through what we expect to find, what would change the estimate, and what the work covers before anything is booked. The price is confirmed before we start.
Call (469) 459-6546 and describe the situation.
A property that was wired for one era of appliances does not automatically keep up with the next. A panel sized for a home without an EV charger, a home office, and a modern kitchen is not necessarily able to absorb all three without a load calculation and, in many cases, an upgrade.
The first step is figuring out what the existing supply can take. We run a load calculation against what is already on the panel and what is being added. If there is room, the new circuit goes in cleanly. If the panel is at its limit, the options are a panel upgrade, a subpanel for the new load, or a conversation about what gets prioritized.
A panel that trips repeatedly under normal load, one that has no room for additional breakers, or one that predates modern standards is a candidate for replacement rather than a workaround. We size the new panel against the actual load and the anticipated one, handle the grounding and bonding, and confirm the service entrance can support the upgrade before the work starts.
For a detached garage, a workshop, or a large addition, a subpanel fed from the main can be the cleaner solution. It keeps the new circuits organized and does not require pulling every existing breaker to find space. The feed from the main still has to be sized correctly, and the main panel still has to have the capacity to carry it.
A city of this size generates a wide range of electrical work. Apartment turnovers, older homes with wiring that has not been touched in decades, commercial tenants building out leased space, and homeowners adding to properties that were already at capacity. The jobs below come up regularly across all of them.
An outlet that stopped working, a switch that behaves inconsistently, or a bathroom that lacks GFCI protection are all straightforward jobs that get handled in a single visit. Where arc-fault protection is required by current code and is missing, we identify it and explain what adding it involves. GFCI and AFCI devices are not interchangeable, and the right one depends on the circuit and the location.
High-draw equipment needs its own circuit. A dryer, a range, a hot tub, or a table saw running on a shared circuit is a problem waiting to happen. We size the breaker and the wire for the actual load, run the circuit from the panel to the equipment location, and install the correct outlet for the voltage and amperage the equipment requires. EV charger circuits follow the same process: a 240-volt dedicated run sized for the charger's rated amperage.
Running power to a structure that is not connected to the main house involves its own set of considerations. The feed has to be sized for everything the structure will run, buried conduit has to meet the depth requirements for the installation type, and the subpanel or disconnect at the far end has to be set up correctly. Electric gate operators need a dedicated circuit at the gate location, and the feed from the house has to support the draw without interference from other loads.
Outdoor wiring is not the same as indoor wiring. Weatherproof boxes, the correct conduit and burial depth, GFCI protection at outdoor receptacles, and fixtures rated for wet or damp locations are all part of getting exterior lighting done right. Security lights and motion sensors need the circuit to be accessible for future adjustment without opening up a finished wall. Landscape lighting circuits are often low-voltage, but the transformer and the feed to it still need to be installed correctly.
In Richardson's housing stock, panels are most commonly in a garage, a utility closet, or a hallway near the laundry area. Older homes occasionally have panels in a basement or on an exterior wall. Wherever the panel is, clear access to it matters. A panel blocked by shelving, stored items, or a water heater that was installed in front of it takes longer to work on and can limit what the inspection covers.
Knowing where the panel is before we arrive saves time. If there are specific breakers that have been tripping, noting which ones and what is on those circuits gives us a head start. For larger jobs, having the area around the panel cleared and the work location accessible means the job moves from diagnosis to repair without delay.
Rental properties in a city this size involve a layer of coordination that owner-occupied homes do not. The person booking the job is usually not the person who has to be home for it, and the invoice often needs to go to an address that is not the property address.
We work around that from the first call. If a tenant needs to be present, we confirm the scheduling with whoever arranges access. If the landlord needs a written record of what was done, we cover that on the call so nothing is missing when the work is complete.
For properties being turned between tenants, an electrical inspection before the next occupancy is a practical step. Outlets that were working when the last tenant moved in are not always working when they left, and a quick check of the panel, the GFCI devices, and the smoke detector wiring takes a short visit and catches problems before they become a call from a new tenant on day one.
We are available around the clock, every day of the week, including weekends and holidays. There are no closed hours. A breaker that will not reset at midnight is the same call as one at noon, and it gets the same response.
For planned work, the call is where the schedule gets set. We ask what the job involves, scope it as far as we can on the phone, and confirm what is available. For businesses that have to stay open during the work, we talk through which circuits will be affected and when, so the interruption is as short as it needs to be.
Flickering lights fixed. Dead outlets revived. Power back on.
We cover Richardson and the surrounding area across Dallas County, including Plano, Garland, Murphy, Addison, and Sachse. If the property is in one of those communities, the call works the same way. Describe the situation, get the job scoped, and confirm the schedule.
Not the biggest name in town. Just the one that answers. No runaround. What the work involves is covered on the electrical service list.
Existing solar or battery systems affect how the panel is configured and how new circuits are added. We identify what is installed and how it connects to the panel before scoping any additional work. The goal is to make sure new work integrates correctly with what is already there.
We identify it, explain what the problem is, and give you the options before any further work proceeds. Unsafe wiring or connections do not get left in place without being flagged, regardless of who did the original work or when. The scope and cost of correcting it are confirmed before we proceed.
A breaker that trips once under a clear overload, such as running too many appliances on one circuit, is often a sign to redistribute the load. A breaker that trips repeatedly under normal use, will not stay reset, or trips without an obvious cause is a different situation. Call us and describe what is on that circuit and how often it trips. We can walk through what the diagnostic visit involves and what we will be looking for when we arrive.
Yes. We coordinate access with whoever is at the property, and the invoice and job summary can go to the landlord separately. Let us know the arrangement on the call and we will confirm the schedule with the right person. Nothing about the process changes based on who is present at the property.
Extension cords are not a substitute for permanent wiring, and using them that way creates a load and a fire risk the cord is not rated for. We replace the extension cord arrangement with a properly wired outlet or circuit at the right location. Call and describe the situation and we will explain what the permanent solution involves.
We handle both. Renovation and addition work on the electrical side covers new circuits, panel capacity assessment, rough-in wiring before the walls close, and finish work after they do. If a project is in the planning stage, calling early means the electrical scope gets built into the project timeline rather than added at the end when the schedule is already tight.
An intermittent fault is one that does not show up consistently, which makes it harder to isolate but not impossible. We check the most likely causes based on the description, test the circuit under load, and look for loose connections, failing devices, or wiring that is close to its limit. If the fault does not appear during the visit, we document what was checked and advise on what to watch for.
It depends on the condition of the wiring, the materials used, and whether it meets current standards for the application. We inspect what is there before recommending whether it can stay or needs to be replaced. Wiring that is not safe for the location or the load does not get reused regardless of who installed it.
A DIY installation that does not meet current standards can often be corrected rather than entirely replaced, depending on what was done and how it was done. We inspect it, identify what needs to change, and explain the options. The goal is to bring it up to code in the most straightforward way the situation allows.
The work is scoped on the call, priced before it starts, and done to the code inspectors here enforce. When we leave, the circuit is tested, the panel is closed, and the work area is left the way we found it.
Call (469) 459-6546 for a quote.
We also take electrical work in: Plano, Garland, Murphy. See our full list of towns.
Below is a look at the electrical work we handle for homeowners, renters, landlords, and small businesses in Richardson and the surrounding area. Each service starts with a call to scope the job and confirm the price before anything is scheduled. Whether the need is a single outlet or a full panel upgrade, the process is the same: describe the situation, get a price, and get it on the calendar.
| Electrical Service | What It Covers | Best For | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades |
| Homes running a 100-amp service, older fuse boxes, or panels that cannot keep up with modern loads | Rapid growth in Richardson means many homes were sized for a smaller electrical load than they now carry. A load calculation confirms the right panel size for what the home needs now and what it is likely to need as EV chargers and appliances come online. |
| Breaker & Fuse Repair |
| Any property where a breaker or fuse is failing under normal use | A breaker that trips without an obvious cause often points to a fault in the wiring rather than the breaker itself. We check the circuit before swapping hardware. |
| Wiring & Circuit Installation |
| Any project that requires new wiring, a new circuit, or updated wiring in an older home | Aluminum wiring and knob-and-tube installations common in older homes require specific handling. We identify what is present during the inspection before any work is scoped. |
Call (469) 459-6546 to describe what you are dealing with and get a price before anything is scheduled.
(469) 459-6546