Commercial and light industrial work in a city of this size runs on a different clock than a standard residential call. A warehouse that needs a subpanel brought up to handle new equipment, a retail space being built out for a new tenant, or a property management company coordinating repairs across multiple units all have the same requirement: the work has to be scoped accurately and scheduled around what cannot be shut down. That is where we start. We handle commercial and light industrial electrical work across Garland, from a single circuit repair to a full service upgrade, and the conversation about what the job involves happens before anything is booked.
Business customers need the electrical side handled without the kind of delay that costs a day of revenue. Property managers need a repair that actually closes the ticket rather than one that surfaces again at the next turnover. The process is the same for both: describe the situation, get the scope confirmed on the phone, and get it on the schedule. We are available around the clock, any day of the week, including weekends and holidays.
Adding a high-draw appliance, an EV charger, or a piece of workshop equipment to a circuit that was not built for it is one of the more common calls we get. The question is not just whether the outlet is the right type. It is whether the circuit feeding that outlet, and the panel feeding that circuit, can carry the additional load without pushing an already stressed system past its limit.
We run a load calculation before any new circuit or appliance connection is quoted. That calculation looks at what the panel is currently carrying, what the new equipment draws, and whether the service entrance can support the total. If the panel has room, we run the dedicated circuit. If it does not, we explain what a panel upgrade involves and what the options are before any work begins. A 240-volt circuit for a dryer, a dedicated feed for a hot tub, or an EV charger circuit all follow the same logic: the supply has to match the load, and we confirm that on the call.
A new appliance or piece of equipment that draws significant current needs its own circuit, sized for that load alone. Sharing a circuit with other devices is how breakers start tripping and wiring starts running hot. We run dedicated circuits for ranges, dryers, hot tubs, and workshop equipment, confirm the outlet type matches the equipment, and verify the panel has the capacity before the work starts.
Ground-fault and arc-fault protection are required in kitchens, bathrooms, garages, and exterior locations, and the code that applies here is the one the local inspectors enforce. Older homes often have none of this protection in place, and the absence is not always obvious until something goes wrong. We identify where it is missing, install the correct device for the location, and test it before we leave.
A safety inspection covers the panel, the wiring, the outlets, the grounding, and the devices throughout the property. These come up most often before a home purchase, before a property is listed, or after a renovation that touched the electrical system. The inspection produces a clear picture of what is out of current standards and what the work to address it involves. That report matters when the property changes hands.
A detached garage or workshop that needs real electrical capacity requires its own subpanel fed from the main service. Running a single circuit out to a shed is not the same as giving a workshop the load capacity to run tools, lighting, and a compressor at the same time. We size the subpanel feed correctly, run the circuit from the main panel, and confirm the grounding meets code at both ends.
Most electrical repairs and installations only require one circuit to be isolated, not a full shutdown. Outlet work, adding a dedicated circuit, replacing a breaker, or installing GFCI devices all happen with the rest of the property running normally. A full shutdown is only necessary when the work involves the main service entrance, a panel replacement, or wiring that runs through areas where isolating a single circuit is not enough to make the work safe.
We confirm which applies before we arrive. If the work requires a full shutdown, we plan it around what the property needs. A business that has to stay open gets a different conversation than a homeowner who can step out for a few hours. A tenant working from home gets the same consideration.
Working here means getting the diagnosis right before the work starts. That means asking the right questions on the call: what runs on the affected circuit, what the property cannot afford to lose power to, and whether there is a time of day or week that creates less disruption. The scope of the job determines the answer, and we give you a realistic picture of what the visit involves before anything is confirmed.
The price for electrical work depends on what the job actually involves, and that only becomes clear once the situation is assessed. A troubleshooting call where the fault is straightforward costs less than one where the problem is buried in a wall or requires pulling a permit to correct. A panel upgrade where the service entrance can carry the new load costs less than one where the service itself needs to be upgraded at the same time.
Three things move a quote: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change. We tell you the price before any work begins, and what it covers is explained clearly on the call. If the inspection reveals something that changes the scope, we explain what it means and confirm the updated cost before proceeding.
Call (469) 459-6546 and describe the situation to get a quote.
Appointments are arranged on the call. We confirm what the job involves, what the property needs, and what time works before anything is booked. For problems that will not keep, we take calls at any hour, any day, and we work around the schedule the property requires.
Tenant-occupied properties get handled with the same attention to scheduling. If a unit needs to be accessible, we coordinate around the tenant's availability. If a business needs the work done before or after business hours, that is part of the conversation when we scope the job. The goal is a visit that fits the property's reality, not just a slot on a calendar.
What happens at the end of a job matters as much as what happens at the start. Every circuit we work on is tested under load before we leave. Every breaker is confirmed to be functioning correctly. Every outlet and device is checked against what the work was meant to accomplish.
Panels are labeled clearly when the work is complete, including any new circuits added during the visit. If the job involved wiring work that required a permit and inspection, we confirm that the work meets the standard the inspector will check before sign-off. That documentation matters when the property is sold or when a new tenant moves in and the next electrician needs to understand what is in the walls. Wiring work checked against code before sign-off is not a formality. It is what protects the property and the people in it.
We serve Garland and the surrounding communities across Dallas County and beyond. That includes Rowlett, Sachse, Richardson, Murphy, and Sunnyvale. Whether the property is inside the city or in one of the communities nearby, the call reaches someone who can scope the job and get it on the schedule. The range of work covered is explained on the page listing our electrical services.
Aluminum wiring does not automatically prevent panel or circuit work, but it does change how the job is scoped. Connections made to aluminum wiring require compatible devices and the correct termination method to reduce the risk of heat buildup at the connection points. When we inspect a property with aluminum wiring, we identify what needs to be addressed and explain what remediation involves before any additional work proceeds.
We handle commercial electrical repair, panel and service upgrades, new circuit installation, lighting, subpanel installation, and wiring for tenant build-outs and commercial renovations.
If a retail space, warehouse, or office property needs electrical work scoped and scheduled, call (469) 459-6546 and describe what the property needs. We confirm the scope and the price before anything is booked.
On a staged rewire, we restore power to completed circuits at the end of each day where it is safe to do so. Areas still being worked on stay isolated. We confirm the staging plan before the job starts so you know which parts of the home will have power each night.
Call and describe the access situation and we will confirm how to handle it before the visit is scheduled. Key collection and return arrangements are worked out on the call.
Losing power to half the house typically points to a problem with one leg of the 240-volt service coming into the panel. Each leg feeds a different set of circuits, so a fault on one leg takes out roughly half the home while the other half stays live. That is a condition that needs attention quickly.
Call (469) 459-6546 and describe which circuits are out and which are working.
We can narrow it down significantly on the call by asking about which circuits are affected, whether the meter is still showing power, and whether neighbors are out too. A fault that stops at the meter is on the utility's side and we will tell you who to contact. A fault that is isolated to part of the panel or to specific circuits is almost always inside the property, and that is where we work.
Small jobs are worth booking on their own. A single dead outlet, a switch that stopped working, or a light fixture that needs replacing does not need to wait until there is a longer list. We scope small jobs on the call the same way we scope larger ones, and the price is confirmed before anything is scheduled.
We run a load calculation to confirm the panel has the capacity to carry the new load without pushing existing circuits past their rating. The service entrance is also checked to confirm the incoming supply can support the additional demand. If the panel or the service needs to be upgraded first, we explain that as part of the scoping conversation.
Garland, Rowlett, Sachse, Richardson, Murphy, Sunnyvale: if you are in this part of Dallas County and need electrical work handled, call (469) 459-6546.
We are available around the clock, any day of the week. The price is confirmed before anything starts. Call for a quote.
Just as close, we take electrical work in: Rowlett, Sachse, Richardson, Murphy, Mesquite. For every town we reach, see our full list of towns.
Below is a look at the electrical work we handle for homeowners, renters, landlords, and small businesses in Garland and the surrounding area. Each service starts with a call to scope the job and confirm the price before anything is scheduled. Whether the need is a single outlet or a full panel upgrade, the process is the same: describe the situation, get a price, and get it on the calendar.
| Electrical Service | What It Covers | Best For | Good to Know |
|---|---|---|---|
| Electrical Safety Inspections |
| Buyers, sellers, landlords, and property managers who need to know the condition of a home's wiring before a transaction or a tenant turnover | An inspection confirms what is present, what is out of current standards, and what the correction involves. The findings are explained before any repair work is quoted. |
| Electrical Panel & Service Upgrades |
| Homes running a 100-amp service, older fuse boxes, or panels that cannot keep up with modern loads | Rapid growth in Garland means many homes were sized for a smaller electrical load than they now carry. A load calculation confirms the right panel size for what the home needs now and what it is likely to need as EV chargers and appliances come online. |
| Outlet & Switch Installation |
| Homeowners adding convenience, updating older receptacles, or bringing a room up to current code | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. We confirm what applies before the work starts. |
Call (469) 459-6546 to describe what you are dealing with and get a price before anything is scheduled.
(469) 459-6546